The Video Fiber Converter is an exclusive design for CCTV signal over fiber application. It converts the standard electronic video analog signal into Multimode fiber, so the longest transmitting distance can be from 2km (M.M.) up to 60km (S.M.) without any amplifiers or repeaters. In the central control side, the optical signal will be converted back to stand video signal (NTSC/PAL/SECAM).

Benefits:

• High bandwidth
• Long transmission distance
• Electromagnetic immunity
• Compact and light weight
• Safety
• Security

Real Time MPEG-4 Video Server Encoder/Decoder

The Encoder/Decoder (ML-ENC) is a high resolution, IP/Ethernet (LAN/WAN) ready digital video server/encoder. Encode video and data from a new or existing analog camera to MPEG-4 digital video for streaming over a wired or wireless network. Specifically designed to meet the increasing need for high quality, reliable, real-time video applications, the encoder is ideal for retrofit or new video surveillance applications. Connect an encoder via MicroTek’s Wireless Ethernet System for ultimate flexibility in locating a camera in an area where it is not possible or cost prohibitive to run wire. Requires no computer programming for standard operation simply plug and play. For advanced setup such as setting IP addresses, changing the User ID/Password, configuring network settings, etc., the system employs an easy to use web browser interface.

 

 

 

Video Conferencing

Video Conferencing is a very strong tool of any office. Following solution can be provided on Video Conferencing platform. (ISDN/IP)

» Desktop (Video Phone):- Desktop (Video Phones) are usually portable devices, meant for single users, have

fixed cameras, microphones and loudspeakers integrated into the console.

 

» Room System (Point to Point):- Room Systems are designed for video conferences where a large number of people will be viewing or participating (for example, training sessions, group meetings, etc.). Rooms are dedicated for video conferencing with multiple monitors and cameras usually built in to the walls. These rooms are usually custom-designed specifically for this application.

 

• Multipoint Video Conferencing:-

Simultaneous video conferencing among three or more remote points is possible by means of a Multipoint Control Unit (MCU). This is a bridge that interconnects calls from several sources (in a similar way to the audio conference call). All parties call the MCU unit, or the MCU unit can also call the parties which are going to participate, in sequence. There are MCU bridges for IP and ISDN-based video conferencing. There are MCUs which are pure software, and others which are a combination of hardware and software. An MCU is characterized according to the number of simultaneous calls it can handle. MCUs can be stand-alone hardware devices, or they can be embedded into dedicated VTC units.

 

Components of Video Conferencing :-

» Video Conferencing Codec’s (Desktop/Room)

» Monitor (TV, Plasma, Video wall)

» Document Camera.

» Projector.

 

 

 

 

 

• Total voice and data communication solution for small and mid-sized businesses.
• Functions as a traditional phone system or an IP Telephony Server.
• Supports both single locations and multi-site networks.
• Basic call center and voice messaging capabilities are built-in.